MSA WORKMAN FP STRYDER 10144431 Instrucciones Para El Usuario página 5

1.0 WORKMAN FP STRYDER SPECIFICATIONS
● The WORKMAN FP Stryder meets ANSI Z359.1-2007 and OSHA 29 CFR Part 1910.66 Appendix C.
● Capacity: 400lbs (182kg) including weight of the user plus tools, clothing and other user-borne objects.
● Weight:
● Flange capacity:
● Materials of construction: ○ Housing, Button, Spring, pin, D-ring connector: Stainless steel
● When used as part of a personal fall arrest system, fall arrest forces must not exceed 1800IBF (8 kN).
● F ree fall distance (limit) must not exceed 6.0 ft (1.8 m) in accordance OSHA, and ANSI Z359.1-2007. The user must comply with applicable
standards.
2.0 TRAINING
It is the responsibility of the purchaser of the WORKMAN FP STRYDER to assure that product users are made familiar with these user instructions and
trained by a competent person. Training must be conducted without undue exposure of the trainee to hazards. MSA offers training programs, please
contact for training information.
3.0 DESCRIPTION
The WORKMAN FP STRYDER is an I-beam anchorage connector. The intended purpose of each element of the WORKMAN FP STRYDER is given
in sections 3.1 through 3.3 below. See inspection diagram for location of elements.
3.1 ATTACHMENT ELEMENTS
3.1.1 D-RING
Used for connection to a lanyard element of a personal fall arrest system.
3.1.2 JAW
Used for connection to the I-beam anchorage.
3.2 CROSSBAR
The crossbar connects and provides the means for adjustment of the jaws, and anchors the D-ring connector.
3.3 D-RING CONNECTOR
The D-ring connector connects the D-ring to the crossbar, and provides an integral load indicator.
4.0 ANCHORAGE CONNECTOR SELECTION AND APPLICATIONS
4.1 PURPOSE OF ANCHORAGE CONNECTOR
The WORKMAN FP Stryder is designed for use by one person working at an elevated work level. The WORKMAN FP Stryder links the user to an
I-beam anchorage point. It allows the worker to utilize existing I-beam as temporary anchors, without the need for drilling or permanently attaching
anchorages. It moves with the worker allowing for continuous tie off.
4.2 USAGE LIMITATIONS
The following application limitations must be considered and planned for before using the WORKMAN FP Stryder.
4.2.1 PHYSICAL LIMITATIONS
Persons with muscular, skeletal, or other physical disorders should consult a physician before using. Pregnant women and minors must never use
the WORKMAN FP Stryder. Increasing age and lowered physical fitness may reduce a person's ability to withstand shock loads during fall arrest or
prolonged suspension. Consult a physician if there is any question about physical ability to safely use this product to arrest a fall or suspend.
4.2.2 ENVIRONMENT
Chemical hazards, heat and corrosion may damage the WORKMAN FP Stryder. More frequent inspections are required in these environments. Do
not use in environments with temperatures greater than 185ºF (85ºC). Use caution when working around electrical hazards, moving machinery and
abrasive surfaces.
© 2013 MSA
○ Model 10144431: 5 lbs (2.3kg)
○ Model 10144432: 11.9 lbs (5.4 kg)
○ Model 10144431 : 4.00 inch (10.2cm) to 13.5 inch (34.3cm)
○ Model 10144432 : 14.00 inch (35.6cm) to 23.5 inch (59.7cm)
○ Glide pads: Teflon impregnated thermal plastic.
○ D-ring: Alloy steel.
○ Crossbar: ■ Model 10144431: Aluminum alloy
■ Model 10144432: Alloy steel
ENGLISH
P/N 10145808
Page 5