Securing Child In Carrier - Nuna pipa Manual Del Usuario

Ocultar thumbs Ver también para pipa:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Always place harness between seat and
attachment bars.
4 Repeat process for second
shoulder harness strap.
Crotch belts
5 Identify crotch belt slot that
will achieve a snug fit. Change
crotch belt slot if necessary.
1) Smaller babies use this position.
Crotch belt is threaded through
rear slot and up through front
slot as shown.
2) Medium sized babies use this
position. Crotch belt is
threaded into rear slot as
shown.
13
3) larger babies use this
position. Crotch belt is
threaded through front slot
as shown.
Securing
child in carrier
1 loosen harness by pressing
on adjuster button while pulling
on the harness straps.
2 Press button to release the
buckles. Separate chest clip
and spread harness straps
apart.
3 Place child in carrier in
seated position, resting the
child against both the back
and bottom of the seat.
1
2
2
14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido