Disassembly - Parkside PGD 1 A1 Instrucciones De Uso

♦ Turn the water flow regulator anticlockwise,
i.e., in the direction of the broad end of the
symbol
the water flow based on your personal pref-
erence.
♦ When you have finished showering, turn the
water flow regulator clockwise as far as it
will go to stop the water flow.
♦ Turn off the water at the tap.

Disassembly

♦ Remove the garden hose from the hose
connection of the product.
♦ Turn the union nut of the riser pipe anticlock-
wise until it is loose and then remove the
riser. Due to the design, residual water will
drain out of the riser pipe.
♦ Remove the ground rod from its set-up loca-
tion.
│ GB │ IE
■ 6
to start showering (see fig. F). Vary
PGD 1 A1