Dyna-Glo DGP350SNP Manual Del Usuario E Instrucciones Para El Funcionamiento página 12

5. Insert 2 screws (A)
halfway into the top
front threaded holes of
both the cart left side
panel (5) and the cart
right side panel (6).
Attach the upper front
door brace (8) by slid-
ing the cut-outs in the
front door brace (8)
over the 4 screws (A)
and tightening all 4
screws (A).
6. Attach the door as-
sembly (10) to the as-
sembled cart body by
aligning the holes in the
hinge of the door as-
sembly with the holes
in the cart left side
panel (5), inserting 4
screws (B) and tighten-
ing. Adjust the door as-
sembly (10) clearance
to the cart body by
slightly loosening the 4 screws (B), aligning
the door assembly (10) with the cart body,
then tightening all screws (B) securely.
5
8
6
5
6
5
B
10
8
6
A
Hardware Used
A
M6 x 12 Screw
10
Hardware Used
B
M4 x 10 Screw
10
5
10
B
x4
x4