Name And Function Of Controller - Tunturi Vibration plate V20 Manual Del Usuario

- Do not smoke while using the vibration plate.
- Do not use the vibration plate together with
other medical equipments.
- Do not use the vibration plate for medical
treatment purpose.
- Do not use the vibration plate right after a meal
or drink.
- During use, please keep children and/ or pets
away from the vibration plate.
- It is forbidden to put fingers or other foreign
bodies into the gap between the middle cover
and base cover.
- Supervision is needed for child under 10 years
and the aged over 60 years during using the
vibration plate.
- The load capability of the vibration plate is
120kg (265lbs), people over this weight are not
suggested to use the vibration plate.
- This vibration plate is only limited for one-
person use.
⚠ WARNING
• Unauthorized dismantle, disassembly
or renovation is not allowed to prevent
electrical shock or any malfunctions.
Please contact manufacture or local dealer
immediately if there is any service work
needed.
Stop using the vibration plate and unplug
power cord from the power supply
immediately under below conditions.
- Water or other liquid is accidentally splashed
onto the vibration plate or controller.
- Any accessory is found damaged or internal
component is exposed.
- Feel abnormal or severe pain during use.
- Power failure.
- Thundering or lighting weather.
Plug and power cord
- Check if the voltage complies with the one
specified for the vibration plate.
- Do not retract the power plug with wet hand to
prevent electric shock.
- Hold the plug rather than the power cord to
pull out the power cord.
- Turn off the power switch and remove the plug
from the power supply in case of electrical
failure or if not in use for a long time.
- Stop using the vibration plate if the power cord
has any damage, turn off the power switch, pull
the plug, and replace the power cord or contact
technicians for repair.
- Do not run the mains cable underneath the
equipment. Do not run the mains cable
underneath a carpet. Do not place any objects
on the mains cable.

Name and Function of controller

Power:
Press the button while power plug in, LCD shows
"00" "10" ,the machine is toggling between "On
mode" and "Standby mode".
Mode
Press auto program button, to start a pre
programmed profile "P1, P2, P3" quick.
(Start/ Pause)
- Press the button to start the vibration plate.
- In the operation of the machine, press this
button to stop working.
(speed+)
Speed increase: Manual 1- 30.
- Press this button to increase the speed when
the machine is operating.
(speed-)
Speed decrease: Manual 1- 30.
- Press this button to decrease the speed when
the machine is operating.
(time+)
Time increase:
The default working time is 10 Minutes, divided
into 10 levels.
Press this button to Increase time. ( ± 1 minute )
(time-)
Time decrease: the default working time is 10
Minutes, divided into 10 levels.
Press this button to Decrease time.
Function
Control the three major functions of the vibration
plate.
- Oscillation
- Vibration
- Oscillation/ Vibration combination
English
7