Moving The Appliance; Operation Of The Appliance - TESY CN205EASLFR Manual De Operación Y Mantenimiento

•
Use a suitable tool to fix the feet by means of four
EN
screws which are included in the appliance set;
•
Place the panel heater into a proper working
position before connecting it to the power supply;
•
Choose a suitable place for the appliance, taking
into account the safety instructions;
•
At initial operation of the appliance and when the
appliance has not been used for a long time, it is
possible some odour or smoke to be emitted. These
emissions will disappear after a short period of
appliance operation.

MOVING THE APPLIANCE:

If it is necessary to move the appliance, turn it off
by the major switch, unplug the power cord and move
it with your both hands to its new place, having ensured
it has cooled off. Moving hot appliances may lead to
undesired consequences to the user such as burning
one's skin or inflammable materials getting on the
appliance.
Wall Installation
•
Choose a suitable place so that furniture and other
objects not to obstruct proper convection of the
appliance;
•
Keep the minimum distances as prescribed on fig. 4
- Minimum 60 cm away from the ceiling;
- Minimum 30 сm away from the floor;
- Minimum 30 сm away from a wall or another
object on the left and right side of the panel
heater.
4
Usage and Storage Instructions
•
Installation and fixation of the panel heater(fig. 5)
- Install the
the back panel by means of the screws included
in the package
- Measure the distance between the two centers
of the two upper horizontal openings of the
support bars;
- Drill openings into the wall at the selected place
(openings should correspond to the measured
distance between the support bars centers), put
the dowels into the drilled openings and wind
the screws;
- Hang the panel heater on the wall and make
sure that all minimum safety distances have
been kept (according to fig. 4) and it has been
securely fixed to the wall. Then you can operate
the panel heater.

OPERATION OF THE APPLIANCE

Connect the appliance to a safe power socket, then
1.
push the switch into position I
Push the control panel buttons or use the remote
2.
control in order to set the heating;
Push button – the panel heater goes into
3.
ready-for-operation ("Ready") mode
Push button , in order to set :
4.
- comfort mode 2000W
that the panel heater operates at 2000W
- economy mode 1000W
that the panel heater operates at 1000W
- anti-freezing mode
the panel heater is in anti-freezing operating
mode
In heating mode on the LCD screen will appear the
icon , while in anti-freezing mode it won't be
displayed.
– shaped wall support bars to
– blinking indicates
- blinking indicates
- blinking indicates that