Prepare the Remote Transmitter
Step
1
Charge the Remote Transmitter
1. Lift the rubber cover protecting the
Remote Transmitter Charging Jack.
2. Connect one of the charger
connectors to the Remote
Transmitter Charging Jack.
3. Plug the charger into a standard wall
outlet.
4. Charge the Remote Transmitter for
24 hours for the fi rst charge.
Recharges take only 12 hours.
Note: The Transmitter Indicator Light
will fl ash after 12 hours of charging. For
the fi rst charge, continue to charge the
Remote Transmitter for an additional
12 hours.
5. When charging is completed, replace
the rubber cover.
Note: Approximate battery life between charges is 40 to 60 hours, depending on frequency of use.
Transmitter Indicator Light
Remote Transmitter Function
Continuous Stimulation or Audible Tone Only
button pressed
Momentary (Nick) Stimulation button pressed
Low battery – Any button pressed
Operating Guide
www.sportdog.com
Indicator Light Response
Solid in color
Single fl ash
Flashes continuously
Charger
connector placed
in the Remote
Transmitter
Charging Jack
5