Tone Generator; Usb Connector; Items Supplied - Hilti SI­-AT-­A22 Manual De Instrucciones Original

Status
The indicator LEDs blink green.

3.5 Tone generator

The tone generator incorporated in the torque module emits 2 different signal
tones that provide audible feedback.
Signal tones and their meaning
• Long tone: Confirmation signal (OK / operation completed successfully)
• 3 short tones: Warning signal (not OK / operation was aborted)
Note
The volume of the signal tone can be adjusted or the tone can be muted
completely in the basic settings menu.

3.6 USB connector

The USB connector can be used to connect the adaptive torque module to a
PC. The PROFIS Adaptive Torque PC application provides, among others,
the following functions:
• Adding new data records for new threaded fasteners
• Changing / updating existing data records
• Deactivating / activating the documentation function
• Loading the report from the documentation function
• Setting the clock in the torque module
Note
Further information can be found in the documentation for the
PROFIS Adaptive Torque software.

3.7 Items supplied

Adaptive torque module, operating instructions, quick-start instructions,
USB cable.
Note
You can find other system products approved for use with your product
at your local Hilti Center or online at: www.hilti.com.
4 English
Printed: 10.02.2017 | Doc-Nr: PUB / 5331558 / 000 / 00
Meaning
• It has been detected that the bolt
fastening was already tightened
and then subsequently released.
The bolt fastening was therefore
retightened according to defined
parameters and the tightening
operation was completed suc-
cessfully.