Troubleshooting And Repair; Safety Measures; Instructions Regarding Fault Repair; Fault And Action Table - Hupfer BPN-P Manual De Instrucciones

Section 6
Page 20
6

Troubleshooting and Repair

6.1

Safety Measures

CAUTION
6.2

Instructions regarding Fault Repair

Regular inspection and maintenance of the appliance prevent disruptions and ensure safety.
Inspection and maintenance intervals depend on the use of the appliance. Consult your dealer's after-sales
service department.
You need to indicate the information given on the rating plate if you contact the after-sales service or order
spare parts.
Only use original spare parts to replace defective components.
6.3

Fault and Action Table

Fault
Stacking platform does not move
plates upwards to the dispensing
height even with a low load.
Total locks no longer brake
Platform dispenser for porcelain and lids
BPN-P | BPN-D
Exposed springs
The springs are exposed if the stacking platform is pressed down by hand.
Reaching into the gaps of the exposed springs may cause hand injuries.
Never press the stacking platform down by hand.
Be careful when attaching and detaching the springs. Pay particular attention
to the ends of the tension springs when adjusting springs on sharp edges.
Possible cause
Spring broken
Total locks have worn down
Troubleshooting and Repair
Safety Measures
Remedy
Replace defective springs with new
ones
Either replace the total locks or re-
place the defective casters
91365304_A0