System Connections; Aerial Connection; Speaker Connection; Connecting Your Tv - Pioneer X-HM30V-S Manual De Instrucciones

System connections

Before making or changing the connections, switch off the power and disconnect the power cord from the AC
outlet.
Right Installing the AM loop aerial
speaker
< Assembling >
screws (not supplied)
AC IN
FM aerial
n Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 ohms socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM terminal. Position
the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
n Speaker connection
Twist exposed wire strands
l
together.
Connect the red wire to the plus
l
(+) terminal, and other wire to the
minus (–) terminal.
Use speakers with an impedance
l
of 4 ohms, as lower impedance
speakers can damage the unit.
These speaker terminals carry HAZARDOUS LIVE
l
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
All manuals and user guides at all-guides.com
AM loop
aerial
< Attaching
to the wall >
wall
LOOP
S-VIDEO
HDMI
Incorrect
En-10
TV
Video cable
To video input socket
LINE AUX
COMPONENT VIDEO
COAXIAL
Wall socket
(AC 220 V to 240 V,
50 Hz/60 Hz)
Do not attach these speakers to the wall or ceiling, as
l
they may cause injury in the event of a fall.
Do not mistake the right and the left channels. The right
l
speaker is the one on the right side when you face the
unit.
Do not let the bare speaker wires touch each other.
l
Do not allow any objects to fall into or to be placed in
l
the bass reflex ducts.
Do not stand or sit on the speakers. You may be
l
injured.
Do not connect the supplied speakers with any other
l
amplifier. This may result in malfunction or fire.
n Connecting your TV
Photo and video files from iPod, iPhone and DVD videos
can be viewed by connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the
VIDEO OUT socket at the back of the unit and set the TV
Out on the iPod or iPhone unit to "ON" position.
Notes:
Please make sure to set iPod unit to either NTSC or
l
PAL to match your TV signal. Please visit Apple's
homepage for further information.
You can also use S-Video, component video, or HDMI
l
cable. (page 11)
Left
speaker