Correct Handling Of Dvd-Roms; Insert/Remove The Dvd-Rom - Bosch KTS 650 Instrucciones De Manejo

en 4 | KTS 650 | Operation
3 2
459652/1P
Fig . 5: DVD terminal strip
1 DC input, power pack connection
2 Plug socket for connecting cable to KTS 650
3 Audio sockets
4
3
6
Fig . 6: Connect DVD drive to KTS 650
1 KTS 650
2 DVD drive
3 Power pack
4 Y-connecting piece
5 USB connecting cable
6 Country-specific mains connection cable
After successfully connecting the external DVD drive,
please read the notes in Sections 4.6.2 and 4.6.3,
before installing the software.
Select the Bosch application selection "Software
Installation" in the start screen and follow the
instructions.
1 689 979 856 | 2007-05-04
1
5
459764/2P
1
2
4.6.

Correct handling of DVD-ROMs


Only insert the DVD-ROM in the DVD drive if you
have clean hands that are free of grease!

Do not touch the unlabelled side of the DVD.

Do not write on the DVD and do not place any
stickers on it.

Never use solvents, such as benzine or paint thinner,
record cleaner or antistatic compounds, to clean a
dirty DVD.

Wipe off any fingerprints or dust carefully with a soft
cloth, working from the center to the outside edge.

The DVD is unable to withstand high temperatures or
direct sunlight.
4.6.

Insert/remove the DVD-ROM

459651/2Ko
Fig . 7: Front view of DVD drive
1 DVD compartment
2 LED for access display
lights up, if data is being read from the DVD
3 DVD eject
4 Emergency eject
1. Press the "DVD eject" button on the DVD drive to
make the drawer come out.
2. Insert/remove the DVD into/from the drawer
carefully with the printed side uppermost.
3. Press the "DVD eject" button to make the drawer go
in again.
i
Regularly clean the DVD drive with a cleaning disk
for a CD-ROM or DVD drive (see also Chapter 5.1).
DVD
1 2 4
3
Bosch Diagnostics