Tabla de contenido
Publicidad
en | 4 | DCI 700
• Bosch CRIN 1x, CRIN 2x and CRIN 3x (special acces‐
sories required)
• Bosch CRIN 4x (special accessories required)
• Delphi DFI, Denso Gx and Siemens/VDO/Continental
PCR-I (special accessories required)
The DCI 700 is only intended for commercial and not
for private purposes.
Warning! This product may cause high-frequency inter‐
ference in residential environments so that interference
suppression may be necessary.
---Separator---
2.2
Foreseeable misuse
Misuse ( ) with corresponding intended use ( ):
Use of diesel fuel and instead of test oil.
Only use test oil complying with ISO 4113-CV-AW.
---Separator---
Failure to observe maintenance intervals.
Perform maintenance according to the specified
maintenance intervals.
---Separator---
Use of manually created test sequences with incor‐
rect parameters.
Only use the test sequences specified by Bosch.
---Separator---
Setting incorrect calibration values.
Enter correct calibration values.
---Separator---
Use outside the allowed ambient conditions.
Use the DCI 700 only under the allowed ambient
conditions.
---Separator---
Testing of damaged injectors or injectors that have
not been cleaned.
Prior to clamping, test and clean the injectors as
specified.
---Separator---
2.3
Scope of delivery
Denomination
DCI 700
1x parts set with monitor, mounting and key‐
board shelf
1x cable gland for cable diameters of 13 to
18 mm
1x adapter nut for cable gland
1x parts set with 4 injector chamber devices
4x knurled nut D7
4x O-ring insert D7 without O-rings
40x O-ring 12 x 2 mm for O-ring inserts D7
and D9
40x O-ring 7 x 4 mm for O-ring insert D7
40x O-ring 9 x 3 mm for O-ring insert D9
4x hose assembly for the injected-fuel quanti‐
ty
4x hose assembly for the return quantity
4x return adapter for Bosch CRI
1 689 989 473 | 2020-11-24
Denomination
4x return adapter hose assembly for Bosch
CRI 2.18 and CRI 2.20
4x return adapter hose assembly for Bosch
CRI 3
4x adapter nut M14 x 1.5
2x storage tray
1x drain hose for emptying the heat exchanger 1 680 712 392
1x square box wrench
4x adapter cable for Bosch CRI 1, CRI 2x and
CRI 3x
4x adapter cable for Bosch CRI 3-25 and
CRI 3-27
1x protective tubing, yellow (450 mm)
1x recovery USB stick
1x original instructions
1x installation instructions
1x operating instructions
---Separator---
The order numbers are not part numbers. The or‐
der numbers are used to identify the items inclu‐
ded in the scope of delivery. Components that
can be ordered are identified as spare parts or
wearing parts.
---Separato ---
2.4
Optional accessories
• 1 687 010 607: Accessories for testing Bosch com‐
mon rail Injectors for commercial vehicles (CRIN 1x,
CRIN 2x, CRIN 3x)
• 1 685 200 178: Holding device for hand scanner
More information: Website of Bosch Automotive
Service Solutions for configuring your test and re‐
pair equipment:
tomotive.com/en/en/sharedActions/countrySelec-
tor
.
Order number
---Separator---
2.5
Prerequisites
-
For installation location and mains voltage system,
1 685 200 173
see DCI 700 Installation instructions 1 689 978 630
Internet link
1 683 391 564
---Separator---
2.6
Symbols on the product
1 680 365 012
All warning signs must be in legible condition.
1 687 016 196
Read and understand the operating instructi‐
1 683 373 087
ons before working with the DCI 700.
1 680 109 141
---Separator---
1 680 210 123
Wear safety goggles when working on the
DCI 700.
1 680 210 124
---Separator---
Wear protective gloves when working on the
1 680 210 132
DCI 700.
1 687 410 056
---Separator---
Warning – Hot surfaces. Do not touch hot
1 680 712 382
surfaces.
1 687 016 215
---Separator---
Order number
1 683 351 066
1 680 712 315
1 683 345 066
1 685 520 631
1 681 982 011
1 684 465 890
1 684 465 865
-
1 688 400 654
1 689 989 473
1 689 978 630
1 689 979 860
https://component-test.bosch-au-
Robert Bosch GmbH
Publicidad
Capítulos
Tabla de contenido
