Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Phone book
•
The telephone number is automatically dialled.
4. To end the call, press
the handset on the base station.
4.5
Answering a call
The handset starts to ring during an incoming external or internal call.
•
All registered handsets ring when there is an incoming call.
•
The call symbol
flashes in the display.
•
The caller's number appears in the display if you have caller ID
(CLIP). Contact your telephone line provider for more information. The
caller's name is also shown in the display if:
–
the number is stored with the name in the phone book;
–
the network transmits the name along with the phone number.
1. You have the following options for answering a call:
–
Press
14
to answer the call.
–
Pick up the handset from the base station (function only
possible if auto talk has been activated).
•
During the call, the symbol
name are shown for 10 seconds, then the call duration is shown in the
display.
2. To end the call, press
the handset on the base station.
4.6
Setting the loudspeaker volume
4
15
Press
or
during the call to adjust the loudspeaker volume.
You can choose between 5 different settings. The default setting is
level "3":
The volume is adjusted in the same way in hands free mode.
4.7
Setting the ringer volume on the handset
17
1. Press
.
4
15
2. Press
or
repeatedly, select 'HS SETTINGS'.
3. Press
to confirm.
17
4
15
4. Press
or
repeatedly, select 'HANDSET TONES'.
6
6
or (if auto hang-up is set on) replace
, the transmitted caller number and
6
or (if auto hang-up is set on) replace
17
5. Press
to confirm.
4
15
6. Press
or
repeatedly, select 'RING VOLUME'.
7. Press
17
to confirm.
•
The current volume is displayed and can be heard.
4
15
8. Press
or
repeatedly to select the ringer volume you
want.
9. Press
17
to confirm your selection or press ESC
the menu without saving..
To turn off the handset ringer permanently, press and hold
8
for approx. 3 seconds. The
display. To reactivate the ringer, press and hold
3 seconds.
5
Phone book
You can store 200 numbers (up to 24 digits long) with an associated name
(up to 12 characters long) in the phone book.
5.1
Save a new entry in the phone book by the phonebook
menu
16
1. Press
.
2. To add a new entry, press the menu key
17
ENTRY' with
.
•
'ENTER NAME' appears in the display. Enter the name using the
alphanumeric keys.
17
3. Press
and enter the telephone number.
17
4. Press
to store the entry in the phonebook or press
3
ESC
to cancel without saving the entry.
5.2
Save a new entry in the phone book by on-hook dial
mode
When you enter a telephone number is standby, and you press afterwards
the menu key
17
you can store the number direct into the
phonebook:
1. In standby enter the telephone number you want to store.
17
2. Press
.
Ultra SR1250
3
to exit
symbol appear in the
8
again for
17
and select 'NEW
Publicidad
Tabla de contenido
