Electrical Installation - Akron Brass STYLE 9325 NAVIGATOR PRO Instrucciones De Instalación, Funcionamiento Y Mantenimiento

Auxiliary Displays
The Navigator Pro system can be easily set up with multiple displays controlling one valve . As long as the display is on
the same CAN network as the valve it is controlling, the valve can be assigned to that display . A single valve can be eas-
ily assigned to as many as 10 displays .
9-7/8"

5.1 ELECTRICAL INSTALLATION

Voltage Requirements:
The system has been designed to work on 12VDC or 24VDC systems . It will operate properly if the voltage is between
10VDC and 32VDC AT THE MOTOR . System voltage is not an adequate measurement to determine if the voltage is ap-
propriate at the motor . To avoid excessive voltage drop and undesired operation, the wire gauge should be 14 AWG or
2-23/32"
larger and the distance from power source to the motor should be no more than 20ft .
2-23/32"
Page 04