Clarion NAX943DV Manual De Instrucciones página 47

ClarionNavi_English.book 38 ページ ２００４年３月１９日 金曜日 午後４時１８分
Recognising overall structure / Switching the language using the programme CD-ROM
5
When the message "Replace a disc"
appears, remove the programme CD-
ROM.
A short, high-pitched electronic sound will
notify you that loading has been com-
pleted.
After loading
1
Insert a map DVD-ROM, and press the
button.
•
The SYSTEM START-UP screen will
appear.
2
Select the unit of distance (km or mile),
highlighting the [ENTER] key in yellow,
and then press the
will appear.
•
If a combination of 2 languages has
been selected, you can choose either
language in which the on-screen infor-
mation appears. Select the language to
be displayed, highlighting the [ENTER]
key in yellow, and then press the
button: the map will appear.
3
Turn off the ignition switch to turn off the
power and finish loading.
NOTE
For a short period of time, the distance on
the map may not match the actual distance
you have travelled. To adjust this, drive on
an open road at a speed of 30 km/h (19
mph) or more for 20-30 minutes, and auto-
matic calibration will be performed. While
doing this, turn off any mobile phones, car-
mounted phones, transceivers, etc.
E-38
button: the map