Pilz PSEN op2/4 Instrucciones De Uso página 80

Operating Manual
Automatic or manual start can be selected via the DIP switches on the
receiver (Fig. 20). Automatic start: Switch position 4 on both DIP
switches to ON Manual start: Switch position 4 on both DIP switches to
OFF
ON
1
ON
1
NOTE: The DIP switches not used for this function are grey.
NOTE: PSEN op4F, PSEN op4H, PSEN op4B: The top and bottom
DIP switches must be set at the same position.
PSEN op2B: It is only necessary to configure the bottom
DIP switch. The position of the top DIP switch does not
affect the function.
27
PSEN op 2/4 Series
2 3 4
2 3 4