Taking A Measurement - Braun VitalScan Plus BP 1750 Manual Del Usario

6075360_BP1700_KAZ Seite 17 Donnerstag, 19. Juli 2007 8:35 08
• Wait approximately 3 minutes before repeating a

Taking a measurement

1. Fasten the monitor on the palm side of your wrist,
2 cm
2. Press the red I/O button (D).
3. Hold the monitor at heart level.
4. At the end of the measurement, a beep sounds and the
measurement.
roughly 2 cm below the palm line.
Make sure that the cuff (G) fits tightly.
The measurement starts automatically. While measure-
ment is in progress, do not move or speak.
reading is displayed:
Upper (systolic) value
Lower (diastolic) value
Pulse
17