Troubleshooting; Safety Notices; Fault Indications - CASO DESIGN Pro S-Line 1800 Manual Del Usuario

7 Troubleshooting

7.1 Safety notices

7.2 Fault indications

Display
E05
caso Pro S-Line 1800

A T T E N T I O N
► In order not to damage the plastic components, do not use
any solvent-based cleaning detergents such as, for example,
gas.
This chapter provides you with important notices with regard to
operating the appliance. Observe the following notices to avoid
dangers and damages:
A T T E N T I O N
► Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs on electrical
equipment.
► Improperly performed repairs can cause considerable
dangers for the user and damages to the appliance.
In the event of a fault, an error code will appear in the
display; it describes the cause of the fault.
PLEASE NOTE
► If error messages continue to be displayed after an extended
waiting period or after resetting the appliance, it must be sent
to customer service to be examined.
Description
Overheating protection
This means that the
temperature had increased to
a temperature of 500˚F. In this
case the appliance turns off
automatically in order to avoid
damage.
In case of "E05" please
unplug the appliance and wait
for 3 minutes in order to reset
the appliance. After this you
can plug it back in and use it
again as usual.
27