Guarantee - Zummo Z06 Manual Del Usuario

Code Description
BEVEL GEAR+LOWER CONNECTING ROD
0504028
BOLT
0504A00 PRESS SET
0504B00 BLADE SHAFT
0504B04 BLADE SHAFT COTTER
0505002G SQUEEZING TRAY (GREY)
0505003G BLADE Z05 (GREY)
0505004G BALL 80 (BRIGHT GREY)
0505005G BALL 67 (DARK GREY)
0505006G CUP 90 (BRIGHT GREY)
0505007G CUP 75 (DARK GREY)
0505009A CUP SHAFT
0505010A FASTENING NUT WITH RAKED JOINT
0505010A-1 CUP NUT
0505010A-2 FASTENING NUT JOIN 20
0505011A SQUEEZING-TRAY SHAFT
0505014 TRAY FILTER
0505016 PEEL EXTRACTING BANDS
0505020 M5 S.STEEL KNOB
0506001/2A PROGRAMMER ZUMMEN 230V
0506002C MICRO-COUNTER HOLDER
0506003 COVER MICRO HOLDER
0506005/1 COVER MICRO HOOP
0506006/1 SQUEEZING TRAY-MICRO CLAMP
0506007 MICRO (SHORT)
0506008 MICRO (LONG)
0506010 POWER CORD
0506014 POWER BASE WITH FUSES
0506015 BLACK BIPOLAR SWITCH
0506021 CONNECTION
0508002 Z06 S.STEEL BIN
15

GUARANTEE

ZUMMO-INNOVACIONES MECÁNICAS S.A., through its official distributor, guarantees their
machines for a period of 3 YEARS or for 200,000 squeezing cycles, valid from the date of
delivery to the distributor, in accordance with the following conditions:
This guarantee covers all material or manufacturing defects.
If any faults are found during normal use and within the guarantee period, the defective parts
will be replaced free of charge.
Repair or replacement of machine parts during the guarantee period, does not imply and
extension in guarantee expiration.
The guarantee shall be valid only when presented with the original purchase invoice.
The original parts are covered by a six-month guarantee.
This guarantee does not cover
Any damages not directly caused by a fault of manufacturing or materials.
Any damages due to incorrect installation, abuse, improper use, modifications, accidents or
negligence.
Any parts scratched due to use of improper washing.
Labour not covered by this guarantee.
Any damages caused by unauthorised staff or materials.
Any defects caused by use wearing down; in individual the following component:
18
Code Description
0508008G GREY DRIP TRAY
0508009 DRIP GRATE
0508013 RUBBER MOUNT (85mm)
4/9 MOTOR POLEY (14 XL 037)
6/2 BOLT (BALL BEARING HOLDER)
10/1/2A Z06 GREY SERIGRAPHY
10/21 CONDENSER 30 µf
COUNTERSUNK HEAD SCREW Ø3.5X9.5 DIN-
I-7982- Ø3.5X9.5
7982
I-7985-M4X12 DIN-7985 STAINLESS STEEL BOLT M4X12
I-84-M4X10 S.STEEL SCREW M4X10 DIN-84
I-9021-M4 FLAT WASHER M4 DIN-9021
COUNTERSUNK HEAD SCREW M4X10 DIN-
I-963-M4X10
963
I-985-M4 S.STEEL SCREW M4 DIN-985
ROD.608ZZ BALLS BEARING 608ZZ-C3 SKF
T-30/15-M6 MOTOR PAD T-30/15-M6
T-471-E8 SAFETY RING E-8 DIN-471
T-6885A-6X6X28 COTTER 6x6x28 DIN-6885A
COUNTERSUNK HEAD SCREW M6X30 DIN-
T-7991-M6X30
7991
T-912-M8X35 ALLEN SCREW M8x35 DIN-912
T-912-M8X80 ALLEN SCREW M8x80 DIN-912
T-933-M8X20 SCREW EXAG. M8x20 DIN-933
V0001 INSULATING PAD (150X150)
V0016 GROUND CONNECTOR
V0017 SAFETY NUT NUL-515-1B
V0018 CHAIN JOINT 06B-1 9,525x5,72
V0081 FRONTCOVER CLASP KIT Z05 (2003)
V0133 JUICE TRAY WASHER