Amibot aNIMAL xl Manual De Usuario página 18

EN
Operating the appliance
SUN
0:00
Figure 1
Press the CLOCK button on the
top of the appliance for around 3
seconds (Figure 1). The robot beeps
and the display screen flashes.
Use the up and down arrows to
modify the hour and minutes
(Figure 2). Press the CLOCK button
to switch from hours to minutes,
then the day of the week and
12/24 hr display.
To switch from 24 hr to 12 hr display, press the CLOCK button until
"AM" and "OFF" flash on the display screen. Press the up or down
button once to set the 12 hr display; "ON" appears on the screen.
Press one of the arrow buttons again to switch back to 24 hr mode;
"OFF" appears on the screen and press CLOCK to confirm.
Press the AUTO button to validate the time (Figure 3). A beep
indicates that the time is set.
NOTES:
• If no action is performed for more than 15 seconds when setting the time, the
robot leaves the setting mode.
• Press the AUTO button to confirm the time, otherwise it will not be set.
SUN
11:00
OR
Figure 2
Figure 3
16
SUN
11:00
MON
11:45