Amibot aNIMAL xl Manual De Usuario página 38

EN
Troubleshooting
The appliance
01 does not switch
on.
The robot does
02
not charge any
more.
The robot
03 does not move
correctly
Appliance suction
04
lost
1. The appliance is not
switched on.
2. The appliance has run
out of battery.
1. The robot is not
correctly positioned
on the home base or
it is not plugged in
correctly.
2. The robot is not
switched on.
3. The robot battery is
completely empty.
1. The floor is wet.
2. The dust bin is not
attached correctly.
3. The vacuum nozzle
cover is not clipped on
correctly.
1. The dust bin is full.
2. The vacuum nozzle or
the side brushes are
blocked.
36
1. Switch the power button to
ON.
2. Charge the robot using its
home base or plug it in to the
power cable.
1. Correctly reposition the robot
and place its power sensors
on the home base sensors.
2. Switch the robot on.
3. Plug the robot directly into the
power cable.
1. Dry the floor.
2. Remove and reinsert the dust
bin.
3. Clip the vacuum nozzle cover
on again.
1. Empty the dust bin, clean the
motor and the filters.
2. Remove any hair and debris
from the brushes. Check that
there is no dirt obstructing the
robot.