Amibot aNIMAL xl Manual De Usuario página 23

Operating the appliance
SPOT mode
This mode is the most effective
when cleaning a particularly dirty
area. Press the SPOT button on
the robot or on the Remote
Control (Figure 1). The SPOT light
is steady and the SPOT Mode
symbol appears on the display
screen (Figure 2). With this mode,
the robot will move in a spiral to concentrate vacuuming over the
required area. At the same time, it activates its MAX vacuum power
to vacuum the dust from the floor more easily. Once the area is clean,
the robot returns to its starting point and stops its cycle.
NOTE: To start a cleaning cycle in SPOT mode, the robot must be off its home base.
SUN
00:00
Figure 1
MON
Figure 2
21
11:45
EN