Operation; Basic Functions - SSS Siedle BVPC 850-0 Instrucciones De Empleo

Operation

Display navigation
Navigation in the display works
with the aid of buttons and symbols
which you can select by tapping.
Note
The panel should only ever be oper-
ated using your fingers. Do not use
any sharp-edged or pointed objects.
Switching on the display
• Tap the display to switch it on.
Switching off the display
• Tap the symbol "Switch off dis-
play".
The panel changes to the standby
mode.
Remarks
• Without user activity, the panel
changes after a defined period auto-
matically to the stand-by mode. This
period can be set under Settings >
Display > Switch off display.
• If the panel is in standby mode,
you will still be made aware of
missed door calls and new mes-
sages.
In this case, the relevant status
symbols flash even if the display is
switched off.
22

Basic functions

Accepting a call
As soon as a visitor actuates the call
button at the door, the panel rings
and the speech button flashes. The
display switches on and the picture
of the visitor can be seen in the dis-
play.
The call can be accepted within
45 seconds of the last ring tone.
• Press the speech button.
During an active call, the speech
button lights up.
Note
The panel only transmits speech
in one direction and automatically
switches over.
If the automatic switchover does not
work due to loud incidental noises
at the door station, it is possible
to force switch-over of the speech
direction from the apartment station
to the door station by pressing and
holding down the speech button in
the centre. As soon as this button
is released, the speech direction
switches over from the door station
to the panel.
Door release
To open the door from which the
last door call was made:
• Press the door release button.
The door is opened for 3 seconds.
Ending a call
During an active call, the speech
button lights up.
• Press the speech button in order to
terminate the call.
Setting the call volume
The call volume can be set in five
steps – both during a call and also
without an active call.
1 During a call:
The speech volume can be set by
pressing + or – at the speech button.
2 If there is no active call:
• Open the Settings > Audio set-
tings > Call volume menu.
• Using the controller, adjust the call
volume.
The set volume will be adopted for
future calls.
Switching the light on and off
• Tap the "Light" symbol to switch
the lighting on or off.
Remarks
• The lighting is only switched on
if your electrical installer has con-
nected it.
• After you have tapped the symbol,
the symbol changes colour
(white <–> yellow) and so indicates
the switching status. If the light can
be switched using a different switch,
the actual switching status is only
correctly displayed in conjunction
with a BEM 650-...
Taking a picture manually
After the visitor has actuated the call
button at the door, up to 6 pictures
are taken automatically.
It is possible to take additional pic-
tures manually during a door call.
• Tap the symbol "Save image".