Publicidad
Idiomas disponibles
Idiomas disponibles
- Do not force open the lid, make sure the appliance is completely
depressurized prior to opening.
- Never leave the appliance connected and unattended if is not in
use. This saves energy and prolongs the life of the appliance.
- After having made 10 consecutive portions, respect the rest period
of 5 minutes.
- Pay special attention during the assembly and disassembly of
blades, as they are sharp and could cause harm.
Service:
- Make sure that the appliance is serviced only by specialist
personnel, and that only original spare parts or accessories are
used to replace existing parts/accessories.
- Any misuse or failure to follow the instructions for use renders the
guarantee and the manufacturer's liability null and void.
Installation
- Be sure to remove all packaging material from inside the
appliance.
- Do not remove the support feet of the appliance.
- The product can be levelled using the legs.
- Respect the legal provisions concerning safety distances from
other elements such as pipes, electrical connections, etc.
- Do not cover or obstruct any of the openings of the appliance.
- The plug must be easily accessible so it can be disconnected in
an emergency.
- For greater efficiency, the appliance must be located in a place
where the room temperature is between 12ºC and 32ºC.
- The appliance must be operated with its base feet attached.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been removed.
- Before using the product for the first time, clean the parts that
will come into contact with food in the manner described in the
cleaning section.
-Work with the food you want to process.
- Fill the vessel (F) taking care to observe the MAX level (Fig. 1).
- Freeze the vessel with the food at -20ºC
Language selection:
- Place the jug in the machine with the handle to the user's right
(Fig. 2)
- Attach the jar by turning it 90º clockwise. You will hear 2 clicks
when it reaches the correct position (Fig. 3)
- The message "Attach the jar by turning it 90º" will appear in the
screen.- Press the buttons "+" and "-" at the same time and the
"Language" message will appear in the screen. You can use the
"+" and "-" keys to select the 6 languages available and confirm
by pressing the "START" button (A6).
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- The message "Awaiting JAR" will appear in the screen (A1) (Fig.
4).For safety reasons, the machine will not function if the jar is not
in place.
- Fit the blade (E) onto the spindle of the lid (D), and ensure that it
is correctly secured (Fig. 5)
- Place the vessel (F) into the jar (G)
- Place the jar in the machine with the handle to the user's right-
hand-side (Fig. 2)
- Couple the jar by turning it 90º clockwise. When it reaches the
correct position you will hear 2 clicks (Fig. 3)
- The screen will display the message "Insert PORTION: 0 "
- Select the portion you wish to process, between 1 and 10, by using
the "+" button to increase the portion (A2) and the "-" button to
reduce it (A5)
- The "STOP / DELETE" button sets the counter to 0 (A7)
- Press the "START" button to begin the processing. (A6)
- The screen will display the portions requested, those processed
and an arrow indicating whether the machine is raising or
lowering.
- When the process is complete, you will hear an acoustic signal
and the screen will be lit in green, indicating the portions that
have been processed and those remaining unprocessed in the
vessel.
- If the serving has not been selected on pressing the "START"
button, the appliance will automatically process 10 portions.
- In some preparations pressure may remain in the Jug (G). Always
press the decompression button (K) to enable the Jug (G) to be
removed.
- When a vessel is processed with excess frozen food, the appliance
will detect that the container is over-full and is only processing up
to the correct filling level and it will return to the initial status. The
message "ERROR" container very full" will appear in the screen.
The message will disappear on removing the vessel. Remove the
vessel and stir the excess frozen food to continue processing the
portion safely.
- During operation it is normal for the sound level of the machinery
to vary when working. This is due to the fact that it has a
mechanism that adjusts the revolutions according to the hardness
of the frozen food.
- When the machine detects very hard frozen food, it restarts as a
protection measure. The message "ERROR very hard frozen food"
will appear in the screen. The message will disappear on removing
the vessel.
- If you notice any strange noise while the machine is running,
stop it and check that the accessories and the blade are properly
attached and that the vessel has no indentations. If the noise
persists, contact the technical assistance service.
Double processing function:
- The double processing function enables you to make a second
pass of the blades through the processed frozen food, in order to
obtain optimum textures in frozen foods that are very cold or have
a high water content. To do this, press the button corresponding to
this function (A3).
- The screen will show the message "2P" beside the selected
portions. The machine will perform this function on the selected
portions when the "START" button has been pressed.
Cancel function:
- The cancel function enables you to interrupt the running of
the appliance. To do so, press the button corresponding to this
function (A7).
The screen will display the message "Starting", the machine will
return to its initial position and the screen will display the message
"Insert Portion: 0" when the machine is ready to process once
more.
- When the machine has reached the start, we recommend
Publicidad
