Descargar Imprimir esta página

Taurus ROWZER Instrucciones Originales página 18

Emulsionador y procesador de alimentos congelados
Ocultar thumbs Ver también para ROWZER:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Anomaly
It does not start
It does not detect the jar
The appliance returns to start without
processing the frozen food
The appliance takes a very long time to make
the first portion
The jar opens during processing of the frozen
food
Specifications:
- Maximum absorbed power: 800 W
- Degree of protection: IPX1
- Approx. weight : 15 Kg
- Maximum capacity of the 1L frozen food vessel
Appliance unsuitable for use in the presence of flammable
anaesthetic mixtures with air, oxygen or nitrous oxide.
These specifications are subject to change without notice of
purpose of improvement.
By virtue of the conditions of fabrication of this product, the
maximum absorbed power can differ from that specified.
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists
are included in a collection, classification and recycling system.
Should you wish to dispose of them, use the appropriate public
recycling bins for each type of material.
The product does not contain concentrations of substances that
could be considered harmful to the environment
- This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for the
selective collection of waste electrical and electronic
equipment (WEEE)
Statement of Compliance
I hereby declare under our responsibility that the TAURUS product/s
described in this ROWZER manual comply with the Regulations
EN-60335-1, EN-60335-2-64, EN-62233, EN-55014-1, EN-55014-2,
EN-61000-3-2, EN-61000-3-3, EN-62321 and EN 50564 in accordance
with the Directives 2006/42/EC, 2004/108/EC, 2011/65/EU and
2009/125/EC.
Signed
J.L. Heredia,
Product Engineer
Repair
Check that it is connected to the mains.
Check that the main switch is in the "ON" position.
Check that the jar is properly positioned and has correctly reached 90º from the start
Check that the jar lid has been fitted.
Check that no left-over frozen food is hindering the positioning of the jar.
Possible overheating of the motor. Allow the appliance to cool down.
Frozen food very soft or a temperature over -18ºC that the appliance cannot detect.
Check that the jar lid has been fitted.
Check that the blade is correctly positioned.

Publicidad

loading