Connection To Input3 And Input4 - Pioneer PDA-5001 Manual De Instrucciones

Connection to INPUT3 and INPUT4

Various components can be connected to the INPUT3 and
INPUT4 jacks. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see page 15 for on-screen
setup after connection.
INPUT3
[ON SYNC]
jack
G
Output source
Video component/
personal
G ON SYNC
computer (PC)
with RGB output
G
G
Video component
with component
Y
video output
: Do not connect anything.
Note
Components compatible with INPUT3 are also compatible with
INPUT4.
For the screen sizes and input signals that
INPUT3 and INPUT4 are compatible with, please
refer to Supplement 1 (page 26).
[H/V SYNC]
B R HD VD
B R
B R H/V SYNC
B R HD VD
(C /P ) (C /P )
B B R R
: Connect to this jack.
Installation and Connections
Connection to AV components
Connection to AV component that has
component video jacks
Make component video connections for AV components
such as DVD and LD players or similar components with
component video output capability to the INPUT3 or
INPUT4 RGB jacks.
When connecting to INPUT3
G B R HD VD
(ON SYNC) INPUT3 (H/V SYNC)
On-screen setup is necessary after connection.
Please see page 15.
INPUT3 jacks are all BNC jacks.
If necessary, use pin/BNC conversion adapters (1 (one)
included) to make connections.
When connecting to INPUT4
OUTPUT
ANALOG
R G B ANALOG
( (
INPUT4 R G B
On-screen setup is necessary after connection.
Please see page 15.
75Ωj2.2kΩ
Y C /P C /P
B B R R
C /P
Y C /P R R
B B
9
<ARE1351> En