Pioneer PDA-5001 Manual De Instrucciones página 23

Automatic selection of screen size
according to input signal
By distinguishing between signals such as S1, S2 and
HDTV video signals, etc., screen size is automatically
selected and the following indicators are displayed on the
screen.
Input signal
When S1 video signal (squeeze) is input
When S2 video signal (letterbox) is input
When HDTV signal (1920 x 1080 i, 1280 x 720 p,
1920 x 1080 p) is input
When a 16:9 video signal (squeeze) is input at the
SCART jacks (Refer to the instruction manual of the
connected AV component to determine whether it is
compatible with this function is available or not.)
During personal computer signal input
1 ORIGINAL
The input signal and the screen maintain a dot to line ratio
of 1:1 and is thus highly faithful to the source.
A
640 dots
1280 dots
(Illustration shows 640 x 480 input.)
2 4:3 NORMAL
The display fills the screen as much as possible without
altering the aspect ratio of the input signal.
A
Operation
"FULL" screen size is automatically selected.
"ZOOM" screen size is automatically selected.
"FULL" screen size is automatically selected.
"FULL" screen size is automatically selected.
3 FULL
The display is presented with a widescreen aspect ratio
of 16:9 and fills the entire screen.
480 lines
768 lines
4 ZOOM
The ZOOM setting is available only during personal
computer input (1280 x 1024/60 Hz only).
The input signal and the screen maintain a dot to line ratio
of 1:1. Display is highly faithful to the source. However, in
order to maintain the 1:1 ratio, a portion of the display will
not appear on the screen.
Use 5/∞ to adjust the position of the video image on the
screen.
Screen indication
A
Operations
FULL (S1)
ZOOM (S2)
FULL (HD)
FULL (AUTO)
768 lines
1024 lines
19
<ARE1351> En