Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Serial XSATHP - Technical Features
Microprocessor satellite managing the addressable AVS Electronics peripherals directly connected on
BUS RS 485 line. It manages also conventional detectors connected in the dedicated inputs on board.
The XSATHP satellite in its configuration for SERIAL connection to AVS systems, gives a remote
visualization of the peripherals status directly connected on RS485.
The system is complete of PSTN dialer and/or GSM optional dialer (mod. XGSM) in order to connect
remotely with the management software HPWIN as alternative to the connection via the AVS control
panels.
E
Standard input zones
N
Serial input zones
Zones configuration
G
Zone options (double profile)
Alarm outputs
Telephone dialer
Control on supplying
Programm. of detect. in serial
conn.
Tension
Size
Working temperature
Max current with 3.4 A. supply
unit
Max current with 5.1 supply
unit
Max current consumed on
13,8 V
Battery location
Products must be used according to their destination and in conformity to the norms applied to various
types of systems. Before using the installed products, it is necessary to carry out the test of the system
in order to check functionality as well as respect of the security norms according to what indicated by the
Law n. 46 dating 05/03/90 and norm CEI 79-3.
The device must not be subject to water sprinkle and no object containing liquid must be placed on it.
For the connection with anti-theft cables, with the exception of that for the Control Panel, the shield of each
cable must be only connected to the negative of Satellite.
•
n° 4 programmable ones with detection of the alarm and tamper status
•
n° 1 input dedicated to tamper, balanced and not excludable
• n° 32 if the RS485 connection is used on AVS systems
• According to the control panel to which the satellite is connected:
Immediate, conditioned, immediate with permanent exclusion, immediate
with temporary exclusion, immediate with pre-alarm 1-2-3-4, temporized 1-
2-3, temporized with temporary exclusion 1-2-3, temporary with permanent
exclusion 1-2-3, arming ON, HOME, AREA, PERIMETER, 24 hours
line, temporized 24 hours line 1-2-3, 24 hours line with pre-alarm 1-2-3-4,
tamper line, not used
• According to the control panel to which the satellite is connected:
Pulses, alarm memory and restore, tamper indication, chime function, door,
zones in test, buzzer in alarm, OC outputs activation, AND zone and
directional AND, management of radio survival, alphanumerical stripe with
16 characters, alarm codification, switch alarm
•
n° 1 relay C/NC/NO at positive security programmable on control panel
Only connect circuits operating with SELV tension to these outputs
•
n° 8 transistorized outputs (50 Ma - Open Collector) on terminal board for
connection to optional-relay board mod. MR4/MR8. Programmable from
control panel.
•
n° 1 output (50 mA - O.C.) on terminal board (FA) for good functioning of the
satellite
ATTENTION: the output to terminal TA is not managed
•
PSTN for remote management of the peripherals
•
Optional GSM dialer mod. XGSM
• Indication of functioning anomalies on keypads display
•
From PC in direct connection via HPWIN software and USB cable
•
From PC in telephone connection via HPWIN software and universal modem
•
From PC in direct or telephone connection via control panel
• Nominal stabilized tension of supplying: from 13,5 V
•
CONTXTREAM housing (LxHxD): 330 X 420 X 107 mm
•
CONTXTREAM-S housing (LxHxD): 321 x 279 x 83 mm
• +5 °C / + 40 °C
•
1.3A / 115 V ~
•
0.8A / 230 V ~
•
2A / 115 V ~
•
1.2A / 230 V ~
• Only satellite board 250 mA with PSTN dialer activated
•
Max 17 Ah with CONTXTREAM
•
Max 7 Ah with CONTXTREAM-S
- 22 -
to 14,5 V
Publicidad
Tabla de contenido
