AVS Electronics XSATHP Manual Del Usaurio página 38

Connection scheme of XSATHPI use with XTREAM systems
This option allows to connect up to 32 peripherals/detectors using the serial connection RS485 to
the XSATHP satellite and from here to the XTREAM systems with a dedicated serial.
Example of connection of BM ...HP
Note: the EMITTER must always be connected in traditional way, the receiver only is managed in
RS485
E
N
G
F3.15A
Management software HPWIN
The peripherals/detectors can be connected individually to a PC using the USB connection available
on XSATHP satellite or can be managed remotely using the PSTN/GSM line. The PC allows to use
100% the potential of the peripherals/detectors connected.
Max 32 RX connected in RS485 in //
OC 1 2 3 4 5 6
F5A F3.15A
F3.15A F3.15A
J8
DA DB DA DB
L1 L2 L3
RS485 2 RS485 1
RS485 to XTREAM
control panel
SUPPLYING
7 8 TA FA
J3
USB
RESET
J7
F3.15A
L4 L5 L6 L7 L8 L9 L10 T
VLINEE VLINEE
- 38 -
S1
J5
J6
S4
F2A
+SA +S C NC NO OUT IN
A B A" B"
VPOT ALARM SPK MIC
CONNECTINO OF
TELEPHONE PSTN LINE
Towards
the others
..........
S2