RECOMMENDED LUBRICANTS
Use oils and lubricants with characteristics
the same as those indicated in the table.
GB
CHECK OIL LEVEL
Proceed as indicated.
1 -Turn the unit on and allow
it to warm up for a few
minutes.
2 -Turn the unit off.
3 -Wait for a few minutes to
allow all the oil to flow into
the sump.
4 -Open the door (A).
5 -Extract the dipstick (B) and
check the oil level; top up if
necessary. For the amounts
of oil, see "Technical data".
Important
The oil level must be between the
minimum and maximum marks.
Do
not
mix
characteristics
manufacturers.
All manuals and user guides at all-guides.com
oils
with
different
or
from
different
rod (B)
door (A)
6 -Close the door (A) when the operation
has been completed.
-
-
28
User Manual