Cebora TDA 4 Manual De Instrucciones página 9

5 START-UP
Assemble the welding torch on the central adapter (A).
Make sure that the wire diameter corresponds to the one
indicated on the wire feed roller, and load the wire reel. Make
sure that the welding wire passes through the groove in the
roller.
Before connecting the generator power cable, make sure
that the supply voltage corresponds to that of the welding
machine, and that the earth socket functions properly.
Turn on the generator.
Remove the tapered gas nozzle.
Unscrew the contact tip.
Press the torch trigger and release it only when the welding
wire comes out.
Welding wire can cause puncture wounds.
Never aim the torch at parts of the body when loading the
welding wire.
Screw the contact tip back on, making sure that the hole dia-
meter corresponds to the wire used.
Slide the tapered gas welding nozzle back on.
9