Playback On A Tv - Olympus CAMEDIA C-770 Ultra Zoom Manual Básico

basic_e_d4209_7.fm Page 37 Tuesday, February 3, 2004 3:02 PM

PLAYBACK ON A TV

Use the AV cable provided with the camera to play back recorded images on
your TV.
1
Make sure that the TV and camera are turned off.
Connect the A/V OUT jack on the camera to the video
input terminal on the TV using the AV cable.
Connect to the TV's video input (yellow)
and audio input (white) terminals.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction
manual.
3
Slide the power switch to q to turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
• You are recommended to use the optional AC adapter when using
the camera with a TV.
Note
• Make sure that the camera's video output signal type is the same as
the TV's video signal type.
Connector cover
AV cable
A/V OUT jack (MONO)
En 37
En