System Information; Updating The Interface - Metra 99-7620B Instrucciones De Instalación

SCREEN OPERATION

System Information:

• Go to - SETTINGS>MISCELLANEOUS>SYSTEM INFORMATION
• To access the current software of the product.
• Please have this information available when calling Tech Support for assistance.
14
(CONT)
Attention: In order to update the Axxess interface, the kit must have power from the vehicle.
1. Download and install the WebXXpress software update from axxessinterfaces.com.
2. Connect the USB-MINI-CAB update cable (sold separately) between the Axxess interface and
3. Remove the main connector from the vehicle. This will remove power from the kit.
4. Reconnect the main harness back to the vehicle, putting power back to the kit.
5. From the Start Menu of the computer, click on "USB Bootloader", and then click "Update
6. Within a few seconds, the software will begin to download.

UPDATING THE INTERFACE

the computer. The cable will connect into the port on the Axxess interface labeled "A".
Board".
Note: If 30 seconds elapses before you finish this step, you will need to remove power from
the Axxess interface, reapply power, and then start the update process again.
Note: Please note which firmware downloaded to the interface. This will help in
troubleshooting, if need be.
|
1.800.221.0932 MetraOnline.com