Kit Assembly - Metra 99-7620B Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Using the factory hardware, secure the
model specific radio brackets onto the
radio/climate control panel. (Figure A)
2. Attach the pocket to the radio brackets
using the (4) #8 x 3/8" Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly, and then secure with the
screws supplied with the radio.
(Figure B)
Continue to Axxess
Interface Installation

KIT ASSEMBLY

(Figure A)
(Figure B)
ISO DDIN radio provision
1. Using the factory hardware, secure the
model specific radio brackets onto the
radio/climate control panel. (Figure A)
2. Slide the radio into the bracket/pocket
assembly, and then secure with the
screws supplied with the radio. (Figure
B)
Continue to Axxess
Interface Installation
(Figure A)
(Figure B)
REV. 5/24/2019 INST99-7620B
5