Input Setting [Video2/Video3] - Pioneer AVR-W6100 Manual Del Usaurio

Input Setting [VIDEO2/VIDEO3]

When a video player, DVD player or other component is not connected, you can delete
VIDEO2 and VIDEO3 from the list.
1. Display a menu screen and select [VIDEO SETTING] menu.
(Refer to page 17.)
2. Choose between [VIDEO2] and [VIDEO3].
3. Select video ON/OFF.
Select the connection mode of the source external unit on the right of [VIDEO2] or
[VIDEO3].
Each press of the CH button selects ON or OFF.
Notes:
• Usually [VIDEO1] is ON, so connect the cord supplied with this product to the VIDEO1 input.
• Use the remote control's 5/∞ buttons to select a video source, and the 2/3 buttons to switch
ON/OFF.
V I D E O S E T T I N G
ON
VIDEO2
VIDEO3 ON
S E L E C T
V I D E O S E T T I N G
OFF
VIDEO2
VIDEO3 ON
S E L E C T
20