C
C
2
1
C
C
◗ Place the SmartClean System on a flat,
stable and fluid-resistant surface to avoid any
leakage. Be careful not to tip or move the
SmartClean System when it is ready for use.
◗ Use this appliance for its intended household
use as described in this manual.
1
Place the SmartClean System on a flat, level
surface.
To prevent leaking, do not tilt the SmartClean
System.
While holding the SmartClean System with
2
one hand, press the button located on the
side of the SmartClean System (1) and lift
the SmartClean System (2).
Remove the seal off the cleaning cartridge.
3
NOTE: ONLY USE PHILIPS NORELCO
SMARTCLEAN CARTRIDGE (MODEL JC302)
WITH THE SMARTCLEAN SYSTEM.
◗ When the cleaning cartridge filter is full, the
replacement symbol blinks indicating the
cleaning cartridge should be replaced. See
'Replacing the SmartClean System Cartridge'.
Place the cleaning cartridge in the
4
SmartClean System.
ENGLISH
27