Philips NORELCO S9531 Manual Del Usario página 31

C
C
C
1
2 3
C
C
1
2
4 Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
5 Place new shaving heads in the holder.
Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in
the shaving head holder.
6 Place the retaining ring holder on the
retaining ring (1), place it on the shaving
head (2) and turn clockwise (3) to reattach
the retaining ring.
NOTE: Each retaining ring has two recesses that
fit exactly into the projections of the shaving
head holder. Turn the ring clockwise until you
hear a click to indicate the ring is fixed into
place.
7 Repeat this process for the other retaining
rings.
Hold the shaving head holder in your hand
8
and place the retaining ring on the shaving
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
ENGLISH
33