Thermador PRG304GH Instrucciones De Seguridad página 9

Installation Clearances with Low Backguard
35 ¾" (908 mm)
37 ¼" (946 mm)
as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
Installation Instructions
36" (914 mm) min.
to combustible
materials
Min.
Max.
28" (711 mm)
27¼" (692 mm)
Low Back
24⅝" (625 mm)
24" (610 mm)
max. recess depth
24¾" (629 mm)
23" (584 mm)
44⅞" (1140 mm)
Total Clearance
Figure 2: Installation Clearances with a Low Backguard
Combustible
Materials
9" (229 mm) 9" (229 mm) 9" (229 mm)
Combustible
Back Wall
English 8