Features; Assembly; Operation - RIDGID R860445 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Grease Type ..................................................Up to NLGI #2
Hose Length .............................................................. 39 in.
Maximum Pressure ............................................10,000 PSI

ASSEMBLY

WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled or with damaged or
missing parts could result in serious personal
injury.
If any parts are damaged or missing, please call 1-866-539-1710 for assistance.

OPERATION

WARNING:
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when
you are assembling parts, making adjustments,
cleaning, or when not in use. Removing battery
pack will prevent accidental starting that could
cause serious personal injury.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your
eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
Bulk Fill Port ............................................1/8 in. - 27 NPTF
Cartridge Size ............................................................ 14 oz.
Flow Rate .........................3 oz./min LOW / 9oz./min HIGH
Grease Capacity ..................16 oz. bulk or 14 oz. cartridge
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended
for use with this product. Any such alteration
or modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
WARNING:
Use safety equipment. Protect your eyes, skin,
and lungs while handling, loading, dispensing,
and removing grease. Failure to do so may result
in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
 Lubricate grease fittings and other components on
vehicles, factory equipment, and other machinery.
ATTACHING THE SHOULDER HARNESS
See Figure 1, page 11.
 Remove the battery pack if installed.
 Connect the latches on the shoulder harness to the strap
hangers on the grease gun.
 Adjust the harness to a comfortable position.
INSTALLING / REMOVING BATTERY PACK
See Figure 2 - 3, page 11.
To install:
 Lock the switch trigger by sliding the lock on/off button
into the locked position.
 Insert the battery pack into the product as shown.
 Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
product before beginning operation.
6 - English