Glossary Of Terms; Features - RIDGID JobMax C Serie Manual Del Operador

GLOSSARY OF TERMS

Activate (operating controls)
To move an operating control so that it is in a position
that allows the tool to be actuated or that satisfies one
requirement for the tool to be actuated.
Actuate (tool)
To intentionally cause movement of the tool component(s).
Air consumption
For an air tool, the amount of air the tool uses at a particular
operating pressure and duty cycle. Air consumption is
measured in standard cubic feet per minute (SCFM).

FEATURES

PRODUCT SPECIFICATIONS
Operating Pressure............................................90 psi max.
Air Consumption at 100% Duty Cycle ................................
KNOW YOUR AIR JobMax
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
HEX GRIP
™
Ergonomic handle with Hex Grip
comfort and grip.
IN-HANDLE AIR FILTER
The self-cleaning in-handle air filter helps keep debris out
to extend the life of the tool.
18.2 SCFM at 90 psi
POWER HANDLE
™
overmold improves
™
6 - English
Air inlet port
In an air tool, the opening to which the compressed air supply
is connected, usually by means of a threaded fitting.
Duty cycle
The percentage of continuous use for an air tool.
Maximum air pressure
The maximum allowable pressure of the compressed air, as
specified by the manufacturer, for operating a tool.
Trigger
A tool operating control activated by a tool operator's fingers.
Air Inlet .............................................................. 1/4 in. NPT
Switch .......................................................... Variable Speed
Weight ......................................................................1.5 lbs.
INTERCHANGEABLE HEADS
A variety of interchangeable heads are available for use in
different job applications.
QUICK-CONNECT SWIVEL CONNECTOR
The quick-connect swivel connector helps prevent hose
tangles.
VARIABLE SPEED CONTROLS
Switch Trigger
The variable speed switch trigger delivers higher speed with
increased trigger pressure.
Direction of Rotation Selector
The direction of rotation selector located on the body of the
power handle changes the direction and speed of rotation
of the accessory head.