Care And Maintenance - Teka Square TG Serie Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
of the worktop surface making
sure it is centered. Tighten the
fastenings using the adjusting
screws, starting from the center
and working in a criss-cross order.
5. INSTALLING THE FITTING
ELEMENTS AND SIIPHON
Follow the instructions provided
with the waste kit.

CARE AND MAINTENANCE

Your sink will last longer if it is taken care of properly. Correct care also helps to keep it looking attractive for a long
time.
1. DAILY CARE
The best way to clean the sink is to use a soft cloth or sponge, with commonly available detergents diluted in warm
water. Strong detergents should not be used.
The surface of the sink should be washed with water, drying the damp parts with a spongy cloth.
This will help prevent the formation of limescale marks, especially on dark-coloured sinks.
2. REMOVING STUBBORN MARKS
Traces of stubborn dirt can be removed with a cloth soaked in diluted bleach or alcohol or, in extreme cases, with
acetone.
After this, rinse the surface well with water.
3. SPECIAL CLEANING
The sink is composed of a mixture of quartz particles with a high percentage of inert fillers that make the product
very hard and resistant. This particular characteristic may cause streaking due to the continual rubbing of metal pans.
The streaks are due to the release of small particles of metal, which can be removed with a brush (like Scotch Brite),
together with commonly used detergents.
4. FURTHER RECOMMENDATIONS
Do not use highly alkaline substances like ammonia or caustic soda.
Do not put pans or coffee-pots that have just been taken off the heat (which sometimes reach 500°C) directly in
the sink.
Do not pour boiling oil into the sink, as this could deform the drain pipes.
Do not cut food directly in the sink. Chopping boards should be used for this purpose.
Limescale residue can be removed with vinegar or acetic acid.
Do not put pans or coffee-pots that have just been taken off
the heat (which sometimes reach 500°C) directly in the sink.
STEP1
STEP2
STEP4
STEP5
GB
STEP3
UNDER MOUNT
5

Publicidad

Tabla de contenido
loading

Tabla de contenido