Setting The Temperature; Styling - Silvercrest SLR 40 A1 Instrucciones De Uso

Setting the temperature

You can adjust the temperature in 10°C steps to a temperature between 120
and 180°C or in a further 5°C step to the maximum temperature of 185°C .
Adjust the temperature of the heating element 1 as follows:
■ Press the "+" button 8 to increase the temperature .
Press and hold down the "+" button 8 to jump to the maximum temperature
of 185°C .
■ Press the "–" button 9 button to reduce the temperature .
Press and hold down the "–" button 9 to jump to the minimum temperature
of 120°C .
NOTE
► Select a high temperature for thick and strong hair .
► Select a lower temperature for fine and thin hair .
► If you are unsure, start with a lower temperature and increase the tempera-
ture until you find the ideal temperature for you .

Styling

► Take care when handling the heated curling iron . Do not touch your scalp
or other parts of your body with the hot heating element 1! This could
cause burns!
Once the appliance has heated-up:
♦ Clamp the tip of the hair strand firmly onto the lower end of the heating
element 1 using the hair clip 2 (fig . 1) .
Fig . 1
SLR 40 A1
WARNING! RISK OF INJURY!
GB │ IE │ 23 ■