Silvercrest SLR 40 A1 Instrucciones De Uso página 27

♦ Then roll the heating element 1 into the hair so that the strand is wrapped
around the heating element 1 and the hair clip 2 .
To do this, use the rotation function:
–
Press the left arrow button 4 to wind the hair in a clockwise direction or
the right arrow button 4 to wind it in an anticlockwise direction .
NOTE
► Make sure that you rotate the heating element 1 in the direction of your
hair ends to prevent frizz .
♦ Wait approx . 5–12 seconds in this position . Use the timer:
–
press the
–
Press the "+" 8 or "–" 9 buttons to adjust the time . You can choose 5,
8 or 12 seconds .
–
After the set time has elapsed, you will hear three beeps .
NOTE
► Thick and/or long hair generally requires more time than short and/or fine
hair .
► If you are unsure, start with a lower temperature and a shorter time and
increase them until you find the ideal time period for you .
♦ Unwind the heating element 1 from the hair strand and release the hair
clip 2 .
♦ Proceed with the other strands in the same way .
♦ Allow the curls to cool down before you continue styling the hair .
NOTE
► When you press the "RESET" button 5, the appliance rotates anticlockwise
from whatever position it is in to the starting position so that the hair clip 2
is facing upwards again .
► If you want to put down the appliance at any time during use, simply fold
out the stand 3 on the bottom of the appliance .
■ 24 │ GB │ IE
button 7 . 5 seconds is displayed by default .
SLR 40 A1