Installation Instructions; Safety Instructions - AEG 68070 M Instrucciones Para El Montaje Y Para El Uso

Installation Instructions

Safety instructions

The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Drawers may only be installed under the appliance with a protective
floor.
The cut surfaces of the worktop are to be protected against moisture us-
ing a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Do not use silicon sealant between the appliance and the work top.
Avoid installing the appliance next to doors and under windows. Other-
wise hot cookware may be knocked off the rings when doors and win-
dows are opened.
1
Warning!
Risk of injury from electrical current.
• Before connecting up the hob, disconnect the combination appliance
from the mains.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a qualified
electrician.
• Rated voltage of the combined appliances must match.
1
Important!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can lead to
overheating of the plug.
• Fit plug and socket connections together properly.
A device must be provided in the electrical installation which allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw
type fuses are to be removed from the holder), earth leakage trips and
contactors.
Move the oven steam outlet pipe with a screwdriver to the centre of the
opening in the hob. Then put the outlet connection piece over the pipe.
1
• Moving the panel ring under pressure can scratch the coated metal
surfaces.
19