Information Codes - Samsung MC17T8000C Serie Manual Del Usuario

Information codes

If the oven fails to operate, you may see an information code on the display. Check the
table below for the code, and then follow the directions.
Code
C-20
C-21
C-F0
C-A1
C-F1
C-D0
C-F2
MC17T8000C_AA-01_EN+MES.indb 75 MC17T8000C_AA-01_EN+MES.indb 75
Description
The temperature sensor
read the temperature
incorrectly.
Temperature sensor
detects a higher
temperature than the
set temperature.
The microwave has
sensed an internal
communications failure.
The oven has failed to
sense the opening or
closing of the damper for
1 minute.
Only occurs when
EEPROM Read or Write is
not working.
Control buttons are
touched over 10 seconds.
There is a button
malfunction.
Action
Touch the STOP/CLEAR Eco button and
operate again. If it appears again, turn
off the microwave oven, let it sit for
more than 30 seconds, and then try
setting again.
If this code re-appears, call your local
SAMSUNG Customer Care Center.
Turn off the microwave oven and let it
cool, then try the setting again.
If this code re-appears, call your local
SAMSUNG Customer Care Center.
Unplug the power cord of the oven,
and contact a local SAMSUNG Customer
Care Center.
Clean the keys and check if there is
water on the surface around key. If it
appears again, turn off the microwave
oven, let it sit for more than
30 seconds, and then try setting again.
If this code re-appears, call your local
SAMSUNG Customer Care Center.
Stop the oven and then try again. If
this code re-appears, call your local
SAMSUNG Customer Care Center.
English 75
2020-11-16 2020-11-16 1:42:55 1:42:55