Install Software - Oki C9850hn Guia De Instalacion

Install Software

Selecting a Printer Driver
Fiery PostScript printer driver
Use this driver for high-resolution color
graphics applications and pre-press
graphic proofing. This driver also includes
advanced features which may only be
used by a network administrator.
PCL printer driver
PCL and PCL6 printer drivers are included
mainly for compatibility with legacy
systems.
You can install both drivers and use
either one depending on your application.
However, each driver must be installed
individually.
®
Windows - Network Setup
Print the Configuration Page
1 Press Menu on the control panel.
2 Press the down arrow to select Print
Information. Press Enter.
3 Press the down arrow to select
Network. Press Enter.
4 Execute appears. Press Enter.
Keep these sheets handy: they contain
information you need to set up the
printer on your network.
Install the Driver
1 Insert the CD1 in the CD-ROM drive.
the CD will autorun.
2 Select your language.
3 Accept the license agreement.
4 Click Install Driver.
5 Select network printer.
6 Select Directly to the network using
TCP/IP.
7 Enter the IP Address.The IP address
can be found on the Configuration
Sheets.
8 Follow the in-screen instructions.
Test the Printer Driver Installation
To make sure the printer driver is
correctly installed, print a page from any
program. Reinstall the driver if the
installation failed.
Using a Web Browser (optional)
Use your web browser to configure print
server and printer menu settings on an
embedded web page.
1 Activate your web browser (Microsoft
Explorer or Netscape Navigator).
2 Enter the IP Address for the printer.
Find the address on the network
Configuration Sheets.
3 Click on a tab to select a category.
Install Utilities and Downloads
Note: You must be connected to the
internet to install Internet
downloads.
1 Select Optional Utilities or Internet
Downloads from the CD1 installer
menu bar.
2 Click on the utilities and downloads you
want to install and follow the
instructions.
Install Documentation
Note: To open the on-line manuals, you
must have Adobe
Reader 3.0 or higher installed.
1 Select the Driver Setup tab from the
CD1 installer menu bar.
2 Click Install User's Guide.
3 Follow the on-screen instructions to
complete the installation.
4 To view the manuals, click
Start>Programs>OkiData C9850 User
Guide.
Install EFI Fiery Utilities
1 Insert CD2 into your CD-ROM drive.
2 Select your language.
3 Accept the License Agreement.
4 Select the EFI Application you want to
install.
C9850 Setup Guide
6
® ®
Acrobat