Radio Receiver - Husqvarna HTC T8 Manual De Usuario

HTC T8/RT8/X8/RX8

7.1.2 Radio Receiver

No. LED
1 POWER
2 ALARM
3 RUN
4 ERR
44
Lamp Explanation
Is not lit The receiver is not powered up.
The receiver is powered up but does not have radio
Lit
link.
Flashes The receiver is powered up and has radio link.
Is not lit The receiver is working correctly.
Lit Not working correctly.
Flashes Fault in emergency stop loop.
Is not lit CAN communication is inactive.
Lit The receiver is not transmitting CAN bus commands.
Flashes The receiver has contact with the CAN bus network.
Is not lit CAN bus is OK.
Lit CAN bus cannot contact CAN bus controller.
Flashes CAN bus is not working.
Accessories
D003128, 02.00