Fitting Grinding Tools - Husqvarna HTC T8 Manual De Usuario

HTC T8/RT8/X8/RX8
Raise the handle to the third position in
accordance with the Handle Settings page
32.
Lower the weights back and place a foot on
one of the weights. See Handle Settings
page 32.
The machine may be heavy. Using the fine
adjustment makes it easier to adjust the
settings, see Handle Settings page 32.
Carefully, tip the machine backwards, until
the weights reach the floor.
Tip the machine further back, until all of the
machine reaches the floor.
Ensure that the machine lies supported on
the handle.

5.6 Fitting Grinding Tools

36
WARNING
High Temperature
Risk for Dust
NOTE
Note the direction of rotation of the grinding discs.
Operation
D003128, 02.00