Support
Check that the two red buttons have snapped out, otherwise the door cannot be closed.
The two red buttons have
snapped out CORRECTLY
•
Replace the drip tray, complete with the grounds container.
•
Close the service door.
NOTE 1: If the infuser is not inserted correctly, until it clicks into place, and the two red buttons have not
snapped out, the service door cannot be closed.
NOTE 2: If it is hard to insert the infuser, before inserting it, squeeze it to the right
size by pressing it forcefully from the top and bottom simultaneously, as shown in
figure .
NOTE 3: If it is still hard to insert the infuser, leave it out of the appliance, close the service door, unplug from
the outlet then plug in again. Wait for all the lights to go off, after the diagnostics, then open the door and
replace the infuser.
16
Pin
Bottom pipe on the infuser. The pin must be inserted
into the bottom pipe on the infuser.
CORRECT
Infuser
Push the PUSH symbol fully in until
it clicks into place.
After having heard the click, check
that the red buttons have snapped
out.
The two red buttons have not
snapped out
INCORRECT
C o l l e c t i o n