Beep On/Off; Changing The Language - DeLonghi ESAM6600 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Press the OK button to reset the factory default values.
Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode
or
to change other parameters.
The appliance is now reset to the factory default settings and the READY message is displayed.
17.8 Beep ON/OFF (activates and deactivates the beep)
Press the P button, then press the
repeatedly until the menu arrow is on:
Press the
button (corresponding to the SET symbol flashing on the display) and the appliance will dis-
play "
".
Press the OK button to turn the beep off.
Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode
or
to change other parameters.
The appliance is now set not to emit any beeps and displays the message READY

18 CHANGING THE LANGUAGE

To change the language, press the OK button for at least 5 seconds until the appliance displays the installation
message in various languages. Select the required language and press OK for 3 seconds (as described in sec-
tion 4.1).
20
button (corresponding to the
beep on
C o l l e c t i o n
symbol flashing on the display)

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido